Recycled Rubber Wheel Chock Mod. P07025
The P07025 wheel chock is a braking stop for the tires of trucks, vans and cars on inclined slopes, made in Mexico from recycled rubber and EPDM, from LICA Brand.
- Function: tire retention and braking on inclined slopes
- Composition: recycled rubber and EPDM rubber
- Color: black
- Dimensions: 24 cm long x 18 cm wide x 17 cm high (9.4 x 7 x 6.7 in)
- Weight: 5 kg (11 lbs)
- Drilled hole for chain attachment
- Ribbed surface on the tire contact ramp
- Origin: made in Mexico
- Resistant to moisture, oil, temperature variation and ultraviolet rays
- Maintenance free
- Installation on concrete or asphalt, indoors or outdoors
NORMATIVAS Y CERTIFICACIONES
113-STPS-2009 TIPO III + TIPO II + TIPO VI TENIS DE SEGURIDAD
The P07025 wheel chock keeps a parked vehicle from rolling on a slope, a risk the parking brake does not always resolve on its own, especially with loaded trucks and vans. It is placed against the tire, and its ribbed profile grips the tread to stop movement. At 5 kilograms, one person can place and remove it without tools, and its drilled hole allows it to be chained to the vehicle or a fixed point so it does not go missing between maneuvers.
It is made in Mexico from recycled rubber and EPDM, a combination that brings two concrete advantages: it resists moisture, oil, temperature changes and ultraviolet rays without degrading, and it uses recovered material instead of virgin raw material. Being rubber rather than metal, it also does not damage the lower fascia of cars if the vehicle makes contact. Periodically check that the piece shows no deep cuts or permanent deformation, and always place it on the side the vehicle would tend to roll toward given the slope of the ground.
Recommended for concrete or asphalt parking areas, both indoors and outdoors. It is especially useful in maneuvering yards, loading docks, workshops and any sloped surface where trucks, vans or cars are parked. It fits logistics, transportation, vehicle maintenance and parking management.
