Full Body Positioning Harness with Five D-Rings Mod. ARN-5A-L
The ARN-5A-L positioning harness is a full body harness with five D-rings and 1 3/4 in webbing, which allows work at height with both hands free, from LICA Brand, certified to ANSI Z359.1-1992 and CE EN 361:2002.
- Protection type: fall arrest
- Adjustment type: strap system
- Material: 100% polyester
- Color: red with gold-finish metal hardware
- Class: A (fall arrest)
- Five D-rings: one sliding dorsal, two side and two upper
- Webbing width: 1 3/4 in (44 mm)
- Polyester textile webbing with nylon stitching
- Lanyard keepers integrated into the shoulder straps
- Connection buckles: chest, side and leg
- Adjustment buckles: side and rear
- Quick-connect buckles; available with tongue buckles or QR safety buckles
- Height-adjustable chest strap and sub-pelvic strap
- Adjustable chest and leg straps
- Maximum capacity: 310 lbs (140 kg)
- Maximum tension force: 1,800 lbs
- Free fall limit distance: 6 ft (1.83 m)
- Size: standard (one size)
- Certifications: ANSI Z359.1-1992, CE EN 361:2002 and EN 358:1999
- Master case: 10 pieces
- Includes instructions and labeling with a table to record the start of use
NORMATIVAS Y CERTIFICACIONES
113-STPS-2009 TIPO III + TIPO II + TIPO VI TENIS DE SEGURIDAD
The ARN-5A-L positioning harness goes a step beyond simple fall arrest. Its five D-rings divide the work: the sliding dorsal ring receives the lanyard and adjusts itself to the user’s back, the two side rings allow connection of a positioning lanyard to work with both hands free, and the two upper rings enable rescue and assisted descent maneuvers. In addition, the 1 3/4 in webbing and the sub-pelvic strap distribute the load better than a narrow-webbing harness, which makes a difference on long shifts on structure.
Compared with the ARN-L, the practical difference lies in the type of task: that model handles fall arrest on job sites and scaffolding, while this one was designed for workers who stay in position on towers, poles or structures. It is available with tongue buckles or with QR safety buckles, depending on whether the crew prefers fine adjustment or speed when putting it on. Keep in mind that its hardware is metallic: if the work involves electrical shock risk, the suitable model is the ARN-DIELEC-L. Otherwise, select it within a complete system with compatible anchorage and connection, pre-shift inspection and user training, as required by NOM-017-STPS-2024. Supplied in a master case of 10 pieces.
Recommended for general construction work, scaffold work, building cleaning and repair, telephone towers, electrical sector activities and forestry. It is especially useful when the worker must hold a position on a structure and needs both hands free. It fits telecommunications, structural assembly, industrial maintenance and civil works.
